This article is used to troubleshoot problems related to "configuration barcode switch" and gives the corresponding processing direction and setting entrance.
Applicable to:
A5, A6, A8, CN-40, D-8600, NT-2050, NT-2055M, NT-2085 Pro, C850, E800, R2L, RS-8000BT, RS-8000PT, CS7501, NT-1950
Questions
- What should I do if I set the code switch?
- What is the reason for setting the code switch?
- How to deal with the configuration barcode switch?
- What settings need to be checked to set the code switch?
Resolution / Answer
This article is used to explain the meaning and common treatment directions of the phenomenon of "configuration barcode switch". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.
By turning on the configuration barcode function, you can configure the parameters of the reading module by scanning the configuration barcode.
Note: When modifying the configuration through the configuration barcode, the entire current flag bit list will be saved to the memory, that is, the configuration configured through the serial port but not saved will also be saved together.
Disabled *Enabled
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.