This article is used to troubleshoot issues related to "code scanning interval time" and provides the corresponding processing direction and setting entry.
Applicable to:
A5, A6, A8, CN-40, D-8600, NT-2050, NT-2055M, NT-2085 Pro, C850, E800, R2L, RS-8000BT, RS-8000PT, CS7501, NT-1950
Questions
- What to do with the barcode interval?
- What is the reason for the barcode interval?
- What should I do if the barcode interval is too long?
- What settings need to be checked for the barcode interval?
Resolution / Answer
This article is used to explain the meaning and common processing directions of phenomena such as "code scanning interval time". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.
The interval between two readings in continuous mode. Regardless of whether the last reading was successful or failed, it will automatically enter the next reading after this time. This setting mainly applies to continuous mode
Default: 500ms, range: 0-65535ms
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.