This article introduces the setting method of "Keep data starting position", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
A5, A6, A8, CN-40, D-8600, NT-2050, NT-2055M, NT-2085 Pro, C850, E800, R2L, RS-8000BT, RS-8000PT, CS7501, NT-1950
Questions
- How to set the starting position of retained data?
- Where is the configuration barcode for the starting position of retained data?
- How to adjust the parameters of the starting position of retained data?
Resolution / Answer
This setting is used to intercept, hide, insert, replace or format the scanned code data content. It is usually used when only part of the barcode content needs to be uploaded, useless characters need to be removed, or the business system requires a fixed data format.
There are two methods for initial setting. Method one requires the user to generate a QR code, which is more flexible for more users. Method two can scan the setup code in this manual according to the steps.
**Method 1:**
The starting position configuration barcode content format is: >!00102AXX. XX is the setting variable, and the decimal range is 1-65535.
For example: if the starting position is set to 11, the configuration barcode content is: >!00102A11.
**Method 2:**
a) Scan the "Start Position" configuration barcode
Starting position
Scan the following barcode, starting location.
b) Scan the "numeric configuration barcode", starting from the number, scan the corresponding number configuration barcode. For example, for the 11th digit, scan 1,1; for the 100th digit, scan 1,0,0.
c) Scan the "OK" configuration barcode to end the setting
OK
Scan the following barcode to confirm.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.