This article is used to troubleshoot issues related to "scanning interval setting" and provides the corresponding processing direction and setting entry.
Applicable to:
A5, A6, A8, CN-40, D-8600, NT-2050, NT-2055M, NT-2085 Pro, C850, E800, R2L, RS-8000BT, RS-8000PT, CS7501, NT-1950
Questions
- How to set the scanning interval?
- What is the reason for setting the scanning interval?
- What should I do if I encounter the problem of setting the scanning interval?
- What settings need to be checked when setting the scanning interval?
Resolution / Answer
This article is used to explain the meaning and common processing directions of phenomena such as "scanning interval setting". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.
a) Scan the "Scan Interval Time" configuration barcode
Barcode interval time
Scan the following barcode to specify the interval between scans.
b) Scan the "Digital Setup Code". For example, if the interval is 100ms, scan 1, 0, 0; if the interval is 1005ms, scan 1, 0, 0, 5
c) Scan the "OK" configuration barcode to end the setting
OK
Scan the following barcode to confirm.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.