This article introduces the setting method of "Decoding Beep Duration", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
A5, A6, A8, CN-40, D-8600, NT-2050, NT-2055M, NT-2085 Pro, C850, E800, R2L, RS-8000BT, RS-8000PT, CS7501, NT-1950
Questions
- How to set the decoding prompt tone duration?
- Where is the code for setting the decoding tone duration?
- How to adjust the decoding tone duration parameter?
Resolution / Answer
This setting controls the device's sound, lighting, aiming, or image-related feedback. It is usually used when you need to reduce the beep sound, confirm the scanning status, improve lighting positioning, or adjust the image reading effect.
Users can set the duration of the decoding prompt sound as needed, the default is 50ms.
a) Scan the "Beep Sound Duration" configuration barcode
Prompt tone duration
Scan the following barcode to the duration of the beep.
b) Scan the "Digital Setup Code". For example, if the duration is 50ms, scan 5,0; if the duration is 200ms, scan 2,0,0
c) Scan the "OK" configuration barcode to end the setting
OK
Scan the following barcode to confirm.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.