This article introduces the setting method of "GS1 128 minimum length", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
A5, A6, A8, CN-40, D-8600, NT-2050, NT-2055M, NT-2085 Pro, C850, E800, R2L, RS-8000BT, RS-8000PT, CS7501, NT-1950
Questions
- How to set GS1 128 minimum length?
- Where is the GS1 128 minimum length configuration barcode?
- How to adjust the minimum length parameter of GS1 128?
Resolution / Answer
This setting is used to control the reading, verification, length or output rules of the specified barcode type. It is usually used when certain types of barcodes cannot be scanned, the misreading rate is high, or when it is necessary to limit the reading of barcodes in specific formats.
There are two methods for setting the minimum length of GS1 128. The first method requires the user to generate a QR code, which tends to be set by more users and is more flexible. The second method can scan the configuration barcode in this manual according to the steps.
**Method 1:**
GS1 128 minimum length configuration barcode content format: >!000022XX. XX is a setting variable with a decimal range of 0-255.
For example: if the minimum length of GS1 128 is set to 2, then the configuration barcode content is: >!0000222.
For example: if the minimum length of GS1 128 is set to 12, then the configuration barcode content is: >!00002212.
**Method 2:**
a) Scan the "GS1 128 minimum length" configuration barcode
GS1 128 minimum length
Scan the following barcode, GS1 128 minimum length.
b) Scan the "Digital Setup Code". For example, if the minimum length is 2 digits, scan 2; if the minimum length is 12 digits, scan 1,2
c) Scan the "OK" configuration barcode to end the setting
OK
Scan the following barcode to confirm.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.