This article introduces the setting method of "CODABAR maximum length", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
A5, A6, A8, CN-40, D-8600, NT-2050, NT-2055M, NT-2085 Pro, C850, E800, R2L, RS-8000BT, RS-8000PT, CS7501, NT-1950
Questions
- How to set the maximum length of CODABAR?
- Where is the CODABAR maximum length configuration barcode?
- How to adjust the maximum length parameter of CODABAR?
Resolution / Answer
This setting is used to control the reading, verification, length or output rules of the specified barcode type. It is usually used when certain types of barcodes cannot be scanned, the misreading rate is high, or when it is necessary to limit the reading of barcodes in specific formats.
There are two methods for setting the maximum length of CODABAR. The first method requires the user to generate a QR code, which tends to be set by more users and is more flexible. The second method can scan the configuration barcode in this manual according to the steps.
**Method 1:**
CODABAR maximum length configuration barcode content format: >!000157XX. XX is a setting variable, with a decimal range of 0-255.
For example: if the maximum length of CODABAR is set to 9, the configuration barcode content is: >!0001579.
For example: if the maximum length of CODABAR is set to 20, the configuration barcode content is: >!00015720.
**Method 2:**
a) Scan the "CODABAR maximum length" configuration barcode
CODABAR maximum length
Scan the following barcode to configure CODABAR maximum length.
b) Scan the "Digital Setup Code". For example, if the maximum length is 9 digits, scan 9; if the maximum length is 20 digits, scan 2,0
c) Scan the "OK" configuration barcode to end the setting
OK
Scan the following barcode to confirm.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.