This article introduces the setting method of "single scan time (scan duration) quick setting", which is suitable for scenarios where you need to adjust the "trigger mode" related parameters or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to quickly set the single scan time (scan duration)?
- Is there a quick configuration barcode for a single scan time (scan duration)?
- How to set the single scan time (scan duration) without entering parameters?
Resolution / Answer
This setting controls when the device starts scanning, how long it lasts, and how continuous scans are handled. It is usually adjusted when manual triggering, automatic sensing, avoiding repeated output or improving scanning response speed are required.
Single scan time can be quickly set, supporting 3S, 5S, 10S, 15S, 20S, 30S, 60S, and unlimited time, and eight gears can be quickly set.
Unlimited single scan time (scan duration) fast
Scan the following barcode to quickly set the unlimited single scan time (scan duration).
Lasts 3s
Scan the following barcode for 3 seconds.
Lasts 5s
Scan the following barcode for 5 seconds.
Lasts 10s
Scan the following barcode for 10 seconds.
Lasts 15s
Scan the following barcode for 15 seconds.
Lasts 20s
Scan the following barcode for 20 seconds.
Lasts 30s
Scan the following barcode for 30 seconds.
Lasts 60s
Scan the following barcode for 60 seconds.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.