This article introduces the setting method of "sensitivity level", which is suitable for scenarios where you need to adjust the relevant parameters of "trigger mode" or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to set the sensitivity level?
- Where is the sensitivity level configuration barcode?
- How to adjust the sensitivity level parameters?
Resolution / Answer
This setting controls when the device starts scanning, how long it lasts, and how continuous scans are handled. It is usually adjusted when manual triggering, automatic sensing, avoiding repeated output or improving scanning response speed are required.
Set the sensitivity of auto-sensing trigger. The value returned by querying this parameter is the sensitivity value, such as: special: 0, high: 1, medium: 8, low: 15. Default: high.
Special sensitivity
Scan the following barcode, special sensitivity.
High sensitivity
Scan the following barcode to configure high sensitivity.
Medium sensitivity
Scan the following barcode, medium sensitivity.
Low sensitivity
Scan the following barcode to configure low sensitivity.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.