This article introduces the setting method of "Custom Sensitivity", which is suitable for scenarios where you need to adjust the relevant parameters of "Trigger Mode" or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to set custom sensitivity?
- Where is the custom sensitivity configuration barcode?
- How to adjust custom sensitivity parameters?
Resolution / Answer
This setting controls when the device starts scanning, how long it lasts, and how continuous scans are handled. It is usually adjusted when manual triggering, automatic sensing, avoiding repeated output or improving scanning response speed are required.
Set the sensitivity value of the automatic induction trigger. The smaller the value, the more sensitive it is. The value range is 00-15.
Default: 01 such as:
Set sensitivity to 2
Scan the custom sensitivity configuration barcode first, then scan the digital configuration barcodes 0 and 2
Custom sensitivity
Scan the following barcode to customize the sensitivity.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.