This article introduces the setting method of "Keep tail data", which is suitable for scenarios where you need to adjust the parameters related to "Customized barcode data retention" or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to set up retaining tail data?
- Where is the configuration barcode for retaining tail data?
- How to adjust the parameters of retaining tail data?
Resolution / Answer
This setting is used to intercept, hide, insert or replace the scanned code data content. It is usually used when only part of the barcode content needs to be uploaded, useless characters need to be removed, or the business system requires a fixed data format.
The tail data of the decoded output data is intercepted, and the length of 1-65535 bytes can be configured. If the configured length exceeds the barcode data length, the entire content of the current barcode will be retained.
For example, barcode data: 12345ABC, retain the last 3 bytes of data, then output: ABC, retain the last 5 bytes of data, then output: 45ABC.
Disable retention of tail data
Scan the following barcode to configure retention of trailing data will be prohibited.
Enable retaining tail data
Scan the following barcode to enable retention of trailing data.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.