This article introduces the purpose and setting method of "suffix terminator setting", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to set the suffix terminator?
- Where is the end character configuration barcode?
- How to adjust the suffix terminator parameters?
Resolution / Answer
This setting is used to control the end character automatically added at the end of the scanned code data. It is usually used when you need to automatically wrap the line after scanning the code, jump to the next input box, or do not want to output any end characters.
The end character is a character format added after the decoded data: decoded data + end character.
Disable suffix terminators
Scan the following barcode to set the prohibited suffix terminator.
Carriage Return + Line Feed CR LF
Scan the following barcode to press Enter or Line Feed CR LF.
Enter CR
Scan the following barcode to press Enter CR.
TAB
Scan the following barcode to hit TAB.
Enter Enter CR CR
Scan the following barcode to press Enter CR CR.
Carriage Return and Line Feed CR LF CR LF
Scan the following barcode to press Enter and Line Feed CR LF CR LF.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.