This article introduces the setting method of "quickly set the length of retained header data", which is suitable for scenarios where you need to adjust the relevant parameters of "custom barcode data retention" or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to quickly set the length of retained header data?
- Is there a quick configuration barcode to retain the length of header data?
- How to set the length of retained header data without entering parameters?
Resolution / Answer
This setting is used to intercept, hide, insert or replace the scanned code data content. It is usually used when only part of the barcode content needs to be uploaded, useless characters need to be removed, or the business system requires a fixed data format.
Configure the length of reserved header data, ranging from 1-65535 (0xFFFF). It is necessary to cooperate with the barcode generation tool to generate a custom length configuration barcode, the format is 80828XXXX (XXXX is an uppercase hexadecimal value), for example, if 15 bytes of characters need to be reserved, the configuration barcode value is: 80828000F.
Reserve 1 byte header data
Scan the following barcode to retain 1 byte of header data.
Reserve 9999 bytes of header data
Scan the following barcode to retain 9999 bytes of header data.
Reserve 65535 bytes of header data
Scan the following barcode to retain 65535 bytes of header data.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.