This article introduces the setting method of "quickly set the length of retained tail data", which is suitable for scenarios where you need to adjust the parameters related to "custom barcode data retention" or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to quickly set the length of retained tail data?
- Is there a quick configuration barcode to retain the length of the tail data?
- How to set the length of retained tail data without entering parameters?
Resolution / Answer
This setting is used to intercept, hide, insert or replace the scanned code data content. It is usually used when only part of the barcode content needs to be uploaded, useless characters need to be removed, or the business system requires a fixed data format.
Configure the length of retained tail data, ranging from 1-65535 (0xFFFF). It is necessary to cooperate with the barcode generation tool to generate a custom length configuration barcode in the format of 8082BXXXX (XXXX is an uppercase hexadecimal value). For example, if 15 bytes of characters need to be reserved, the configuration barcode value is: 8082B000F.
Reserve 1 byte of tail data
Scan the following barcode to retain 1 byte of trailing data.
Reserve 9999 bytes of tail data
Scan the following barcode to retain the 9999 bytes of trailing data.
Reserve 65535 bytes of tail data
Scan the following barcode to retain the 65535 bytes of trailing data.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.