This article introduces the setting method of "Quickly setting the starting position of retaining intermediate data", which is suitable for scenarios where you need to adjust the parameters related to "Custom barcode data retention" or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to quickly set the starting position of retaining intermediate data?
- Is there a quick configuration barcode for retaining the starting position of intermediate data?
- How to set the starting position of retaining intermediate data without entering parameters?
Resolution / Answer
This setting is used to intercept, hide, insert or replace the scanned code data content. It is usually used when only part of the barcode content needs to be uploaded, useless characters need to be removed, or the business system requires a fixed data format.
Configure the starting position of retained intermediate data, ranging from 1-65535 (0xFFFF). It is necessary to cooperate with the barcode generation tool to generate a custom length configuration barcode. The format is 80829XXXX (XXXX is an uppercase hexadecimal value). For example, if the data after the 15th byte character needs to be retained, the configuration barcode value is: 80829000F.
Keep data after the first byte
Scan the following barcode to retain the data after the first byte.
Keep data after the 9999th byte
Scan the following barcode to retain the data after the 9999th byte.
Keep data after the 65535th byte
Scan the following barcode to retain the data after the 65535th byte.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.