This article introduces the setting method of "Transmit Code 39 check digit", which is suitable for scenarios where you need to adjust "Code 39" related parameters or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to set the transmission Code 39 check digit?
- Where is the transmission code 39 check digit configuration barcode?
- How to adjust the transmission Code 39 check digit parameters?
Resolution / Answer
This setting is used to configure the communication method or communication parameters between the device and the host. Usually when connecting to a computer, serial device, RS485/Modbus network or access control Wiegand system, you need to ensure that the parameters at both ends are consistent.
Scan this barcode to transmit the data verification code.
Transmit Code 39 check digit
Scan the following barcode to transmit the Code 39 check digit.
Scan this barcode to transmit data without a checksum.
Do not transmit Code 39 check digit
Scan the following barcode without transmitting the Code 39 check digit.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.