This article introduces the setting method of "MSI check digit", which is suitable for scenarios where you need to adjust "MSI/MSI PLESSEY" related parameters or scan the corresponding configuration barcode.
Applicable to:
F16, F18W, K20, K28, L5, L5S, L8, L8BL, L8BLS, L8S, M60, M80, NT-1228BL, S5, S8, Z2S, C750, W22, W28, DS8100, DS2800, DS7500, DS8500, H8, M5, M5S, M8BT, M8BTS, NT-91
Questions
- How to set MSI check digit?
- Where is the MSI check digit configuration barcode?
- How to adjust the MSI check digit parameters?
Resolution / Answer
This setting is used to configure the communication method or communication parameters between the device and the host. Usually when connecting to a computer, serial device, RS485/Modbus network or access control Wiegand system, you need to ensure that the parameters at both ends are consistent.
These check codes at the end of the barcode verify the integrity of the data. At least one checksum is always requested; the checksum is not automatically transmitted with the data.
An MSI check digit
Scan the following barcode to configure an MSI check digit.
If two check codes are selected, the MSI check digit algorithm is also selected.
Two MSI check digits
Scan the following barcode to configure two MSI check digits.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.