Skip to main content

What to do with the output format | M-280 Type

Updated
This article is used to troubleshoot issues related to "output format" and provides corresponding processing directions and settings.

Applicable to:

C990, I5, I8, W8-WIFI, W8-X, W9, W9S, NT-1202, NT-1202W, CS8501, GY-20U, GY-30U, GY-50U, GY-60U, NT-90

Questions

  • What to do with the output format?
  • What is the reason for the output format?
  • How to deal with the output format?
  • What settings need to be checked for output format?

Resolution / Answer

This article is used to explain the meaning and common processing directions of phenomena such as "output format". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.

The following is the data output format

  Barcode message (4 bytes)   Prefix (4 bytes)   AIM ID   Barcode content   Suffix (4 bytes)   Terminal character (1 byte)  

             

barcode message

  1. The default output is not to output barcode messages.
  1. Open and close barcode message output through serial port commands and barcode scanning.
  1. Only supports serial port mode, USB keyboard is not supported

The format is defined as follows:

  Start mark 0x03 (1 byte)   Barcode encoding code (1 byte) hexadecimal   Barcode length (2 bytes) 0x0001 ~0xFFFF  

       

The barcode encoding code is as follows:

  code   two-dimensional barcode   code   one-dimensional barcode   code   one-dimensional barcode  

  0x 41   PDF417   0x61   UPC A   0x71   Pharmacode  

  0x 42   Micro PDF417   0x 62   UPC E   0x72   GS1 DataBar 14  

  0x 43   Data Matrix   0x 63   EAN 8   0x73   GS1 DataBar Expanded  

  0x 44   QR   0x 64   EAN 13   0x74   GS1 DataBar Limited  

  0x 45   Micro QR   0x 65   Code 128   0x75   Composite Code-A  

  0x 46   Aztec   0x66   Code 39   0x76   Composite Code-B  

  0x 47   MaxiCode   0x67   Code 93   0x77   Composite Code-C  

      0x68   Code 32      

      0x69   Code 11      

      0x6A   Codabar      

      0x6B   Plessey      

      0x6C   MSI Plessey      

      0x6D   Interleaved 2 of 5      

      0x6E   IATA 2 of 5      

      0x6F   Matrix 2 of 5      

      0x70   Straight 2 of 5      

If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.

Powered by Zendesk