This article introduces the setting method of "one-time code reading timeout", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
E900
Questions
- How to set a code reading timeout?
- Where is the one-time code reading timeout configuration barcode?
- How to adjust the timeout parameter for one code reading?
Resolution / Answer
This article introduces the purpose and configuration method of "One-time code reading timeout". Usually refer to this article when you need to change the default behavior of the device, adapt to the business system, or find the corresponding configuration barcode.
u __One code reading timeout: __The amount of time the scanner is in the code reading state. The set time range is 0 to 3600000 milliseconds. When set to 0, the scanner will always be in the code reading state. Default: 3000 milliseconds.
[One code reading timeout]
Scan the following barcode to configure [timeout for one reading].
Set the timeout for one barcode reading to 1500 milliseconds, which can be set by reading the following barcodes in sequence:
- Read the "Startup Settings"
- Read "One-time code reading timeout"
3. Data code "1 issue", "5 issue", "0 issue", "0 issue" (see appendix - data code)
- Read "Save" (see Appendix - Save or Cancel)
- Read the "Exit Settings"
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.