This article introduces the setting method of "turn on the light", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
E900
Questions
- How to set up lighting lights?
- Where is the configuration barcode to turn on the lights?
- How to adjust the lighting parameters?
Resolution / Answer
This setting controls the device's sound, lighting, aiming, or image-related feedback. It is usually used when you need to reduce the beep sound, confirm the scanning status, improve lighting positioning, or adjust the image reading effect.
Let the scanner illuminate the specified color of light for a period of time. When executing this command, the scanner will not scan and read codes. Before using this function, you need to check which colors of lights the scanner supports this function.
Command parameters:
C, LED color: 0C - red, 1C - white, 2C - green, 3C - blue
D, The duration of LED lighting, in milliseconds, and the value range is 10 - 3600000.
Send: LEDONl$ $ represents Data. When Data is '*' or '&', the response is: LEDONl<ACK>; when Data is '^', the response is: LEDONl1C10-3600000D<ACK>;
Turn on the white light for 1 minute:
Send ~<SOH>0000#LEDONI1C60000D;<ETX>
Reply <STX> <SOH>0000#LEDONI1C60000D<ACK>;<ETX>
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.