This article introduces the setting method of "Data format mismatch error tone", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
E900
Questions
- How to set the data format mismatch error tone?
- Where is the configuration barcode for the data format mismatch error tone?
- How to adjust the sound parameters for data format mismatch errors?
Resolution / Answer
This setting is used to intercept, hide, insert, replace or format the scanned code data content. It is usually used when only part of the barcode content needs to be uploaded, useless characters need to be removed, or the business system requires a fixed data format.
If the data format mismatch beep is enabled, the scanner will emit an error beep when reading a barcode that does not meet the data format requirements.
[Close]
Scan the following barcode to [Close].
**[Open]
Scan the following barcode to **[Open].
__Query data format__
u Query the current data format
Get the configuration content of the currently configured data format 0 to data format 3.
u Query the factory default data format
Get the configuration content of factory configured data format 0 to data format 3. All queried data format configuration content formats are as follows:
Data Format 0:xxxx;
Data Format 1:xxxx;
Data Format 2:xxxx;
Data Format 3:xxxx;
[Query current data format]
Scan the following barcode to [query current data format].
[Query the factory default data format]
Scan the following barcode to [query the factory default data format].
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.