This article introduces the setting method of "Verify Splicing Parameter Barcode", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
CS9501, E950, RS-9000BT, RS-9000PT, RF5520, RF5520U
Questions
- How to set the verification splicing parameter barcode?
- Where is the barcode configuration barcode for verifying splicing parameters?
- How to adjust the barcode parameters for verifying splicing parameters?
Resolution / Answer
This setting is used to configure the communication method or communication parameters between the device and the host. Usually when connecting to a computer, serial device, RS485/Modbus network or access control Wiegand system, you need to ensure that the parameters at both ends are consistent.
When using spliced parameter barcodes targeting different models or versions of scanners, the decoder may encounter invalid parameters. This parameter determines how the decoder handles invalid settings in the splicing parameter barcode.
- **Disable**: Ignore invalid parameters and apply valid ones.
- **ENABLE**: Ignore all parameters as long as one or more invalid parameters are present.
* Disable verification of splicing parameter barcode (00h)
Scan the following barcode to configure * Disable verification splicing parameter barcode (00h).
Enable verification of splicing parameter barcode (01h)
Scan the following barcode to enable the verification splicing parameter barcode (01h).
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.