This article is used to troubleshoot issues related to "USB ignores beep commands" and provides corresponding processing directions and settings.
Applicable to:
CS9501, E950, RS-9000BT, RS-9000PT, RF5520, RF5520U
Questions
- What should I do if the USB ignores the beep command?
- Why does USB ignore the beep command?
- What should I do if the USB ignores the beep command?
- What settings need to be checked for USB to ignore the beep command?
Resolution / Answer
This article is used to explain the meaning and common processing directions of the phenomenon "USB ignores beep instructions". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.
Valid only for IBM handheld, IBM desktop and OPOS devices. Scan one of the barcodes below to comply with or ignore the beep instructions. All instructions will still be acknowledged (as if they were processed).
* Comply with USB beep command
Scan the following barcode,* and follow the USB beep instructions.
Ignore USB beep command
Scan the following barcode and ignore the USB beep command.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.