This article introduces the setting method of "Nixdorf Buzzer/LED Options", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
CS9501, E950, RS-9000BT, RS-9000PT, RF5520, RF5520U
Questions
- How to set Nixdorf beep/LED options?
- Where is the Nixdorf beep/LED option setup code?
- How to adjust the Nixdorf buzzer/LED option parameters?
Resolution / Answer
This setting controls the device's sound, lighting, aiming, or image-related feedback. It is usually used when you need to reduce the beep sound, confirm the scanning status, improve lighting positioning, or adjust the image reading effect.
When Nixdorf Mode B is selected, you can specify when the decoder beeps and lights the LED.
* Normal operation (beep/light LED immediately after decoding)
Scan the following barcode to configure* normal operation (beep/light LED immediately after decoding).
Beep/Light LED after transfer is completed
Scan the following barcode to the LED will beep/light up when the transfer is completed.
Buzzer/LED on after CTS pulse
Scan the following barcode to the LED will beep/light after the CTS pulse.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.