This article introduces the setting method of "Transmission Code 11 check digit", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
CS9501, E950, RS-9000BT, RS-9000PT, RF5520, RF5520U
Questions
- How to set the transmission Code 11 check digit?
- Where is the transmission code 11 check digit configuration barcode?
- How to adjust the transmission Code 11 check digit parameters?
Resolution / Answer
This setting is used to configure the communication method or communication parameters between the device and the host. Usually when connecting to a computer, serial device, RS485/Modbus network or access control Wiegand system, you need to ensure that the parameters at both ends are consistent.
This function selects whether to transmit the Code 11 check digit.
Transmit Code 11 check digit (enabled) (01h)
Scan the following barcode to transmit the Code 11 check digit (enabled) (01h).
* Do not transmit Code 11 check digit (disabled) (00h)
Scan the following barcode, * Code 11 check digit is not transmitted (disabled) (00h).
Note: "Code 11 Check Digit Verification" needs to be enabled before this parameter takes effect.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.