This article introduces the setting method of "Scan Mode", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
C740, E740, F1900, F20, K6, L3, L6BL, L3S, L6BLS, L6S, NT-2100, R3L, S3, S6, H3, M20, NT-1228BC, W6, W6-X, Z3S
Questions
- How to set scan mode?
- Where is the scan mode configuration barcode?
- How to adjust the scanning mode parameters?
Resolution / Answer
This setting controls when the device starts scanning, how long it lasts, and how continuous scans are handled. It is usually adjusted when manual triggering, automatic sensing, avoiding repeated output or improving scanning response speed are required.
Users can set the decode mode of the module according to their needs. The default state is the button trigger mode. In this mode, the module starts reading the code after pressing the trigger button, and stops reading the code after the code reading is successful or the trigger button is released.
013300
Scan the following barcode, 013300.
Button trigger*
The user can also set the module to automatic continuous scanning mode. After the setting is successful, the red light of the module will be in a steady state. When a barcode passes by, the module will automatically read the barcode. The same barcode cannot be read repeatedly unless it is moved and read again.
013304
Scan the following barcode, 013304.
Automatic continuous scanning
Intermittent scanning
Scan the following barcode to scan intermittently.
The user can also set the module to the button delay mode. After the setting is successful, the red light of the module will stay on for 3S, and the unread code light will turn off after a timeout of 3S, or the light will turn off after the barcode is read successfully. The key timeout is
013301
Scan the following barcode, 013301.
Key delay
**Key timeout**
When the user uses the key delay mode, the user can set the decoding timeout according to the needs. The default is 3S and the time range is 1-9.9S.
023510
Scan the following barcode, 023510.
Timeout 1S
023530
Scan the following barcode, 023530.
Timeout 3S*
023550
Scan the following barcode, 023550.
Timeout 5S
023599
Scan the following barcode, 023599.
Timeout 9.9S
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.