This article introduces the setting method of "EAN-8", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
C740, E740, F1900, F20, K6, L3, L6BL, L3S, L6BLS, L6S, NT-2100, R3L, S3, S6, H3, M20, NT-1228BC, W6, W6-X, Z3S
Questions
- How to set up EAN-8?
- Where is the EAN-8 setup code?
- How to adjust EAN-8 parameters?
Resolution / Answer
This setting is used to control the reading, verification, length or output rules of the specified barcode type. It is usually used when certain types of barcodes cannot be scanned, the misreading rate is high, or when it is necessary to limit the reading of barcodes in specific formats.
** On and off **
00371
Scan the following barcode, 00371.
Turn on EAN-8*
00370
Scan the following barcode, 00370.
Close EAN-8
**Whether to send check digit**
The EAN-8 barcode data is fixed to 8 characters, and the 8th digit is the check digit, which is used to verify the correctness of all 8 characters. The default is to send the check digit, and the user can choose to send or not send the check digit.
**
**
00571
Send check digit*
**
**
00570
No check digit sent
00561
Scan the following barcode, 00561.
EAN8 hidden system bits
00560
Scan the following barcode, 00560.
EAN8 does not hide system bits*
**Whether to read the additional code**
Enable 2-digit additional code
Scan the following barcode to enable the 2-digit additional code.
Enable 5-digit additional code
Scan the following barcode to enable the 5-digit add-on code.
00553
Scan the following barcode, 00553.
Enable 2-digit and 5-digit add-on codes
00550
Scan the following barcode, 00550.
Turn off add-on code*
Force the additional code to be enabled
Scan the following barcode to force the additional code to be turned on.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.