This article introduces the setting method of "EAN-13", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
C740, E740, F1900, F20, K6, L3, L6BL, L3S, L6BLS, L6S, NT-2100, R3L, S3, S6, H3, M20, NT-1228BC, W6, W6-X, Z3S
Questions
- How to set up EAN-13?
- Where is the EAN-13 setup code?
- How to adjust EAN-13 parameters?
Resolution / Answer
This setting is used to control the reading, verification, length or output rules of the specified barcode type. It is usually used when certain types of barcodes cannot be scanned, the misreading rate is high, or when it is necessary to limit the reading of barcodes in specific formats.
** On and off **
00361
Scan the following barcode, 00361.
Turn on EAN-13*
00360
Scan the following barcode, 00360.
Close EAN-13
Enable UPC/EAN multiple verifications
Scan the following barcode to enable UPC/EAN multiple verification.
Turn off UPC/EAN multiple verifications*
Scan the following barcode to turn off UPC/EAN multiple verification*.
UPC/EAN Security Level 0*
Scan the following barcode, UPC/EAN Security Level 0*.
UPC/EAN Security Level 1
Scan the following barcode, UPC/EAN Security Level 1.
**Whether to send check digit**
The EAN-13 barcode data is fixed at 13 characters, and the 13th digit is the check digit, which is used to verify the correctness of all 8 characters. The default is to send the check digit, and the user can choose to send or not send the check digit.
00461
Scan the following barcode, 00461.
Send check digit*
00460
Scan the following barcode, 00460.
No check digit sent
**Whether to send system bits**
ENA13 sends system bits*
Scan the following barcode to ENA13 will send the system bit*.
ENA13 does not send system bits
Scan the following barcode to configure ENA13 does not send system bits.
** **
**Whether to read the additional code**
Enable 2-digit additional code
Scan the following barcode to enable the 2-digit additional code.
Enable 5-digit additional code
Scan the following barcode to enable the 5-digit add-on code.
00553
Scan the following barcode, 00553.
Enable 2-digit and 5-digit add-on codes
00550
Scan the following barcode, 00550.
Turn off add-on code*
Force the additional code to be enabled
Scan the following barcode to force the additional code to be turned on.
**EAN-13 to ISBN**
ISBN is a book code, which normally outputs 13-digit data. When the EAN-13 conversion to ISBN is enabled, the output is a 10-digit ISBN code. The default is to turn off conversion.
00481
Scan the following barcode, 00481.
Enable EAN-13 to ISBN conversion
00480
Scan the following barcode, 00480.
Close EAN-13 to ISBN*
**EAN-13 to ISSN**
ISSN is a magazine code, which normally outputs 13-digit data. When EAN-13 to ISBN is turned on, the output is a 10-digit ISSN code. The default is to turn off conversion.
01501
Scan the following barcode, 01501.
Turn on EAN-13 to ISSN
01500
Scan the following barcode, 01500.
Close EAN-13 to ISSN
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.