This article introduces the setting method of "UPC-A", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
C740, E740, F1900, F20, K6, L3, L6BL, L3S, L6BLS, L6S, NT-2100, R3L, S3, S6, H3, M20, NT-1228BC, W6, W6-X, Z3S
Questions
- How to set up UPC-A?
- Where is the UPC-A setup code?
- How to adjust UPC-A parameters?
Resolution / Answer
This setting is used to control the reading, verification, length or output rules of the specified barcode type. It is usually used when certain types of barcodes cannot be scanned, the misreading rate is high, or when it is necessary to limit the reading of barcodes in specific formats.
** On and off **
00341
Scan the following barcode, 00341.
Turn on UPC-A*
00340
Scan the following barcode, 00340.
Turn off UPC-A
**Whether to send check digit**
The UPC-A barcode data is fixed to 12 characters, and the 12th digit is the check digit, which is used to verify the correctness of all 12 characters. The default is to send the check digit, and the user can choose to send or not send the check digit.
00421
Scan the following barcode, 00421.
Send check digit*
00420
Scan the following barcode, 00420.
No check digit sent
Whether the system bit is transmitted
UPCA hides system bits
Scan the following barcode to configure UPCA hides the system bits.
UPCA does not hide system bits
Scan the following barcode to configure UPCA does not hide system bits.
**Whether to read the additional code**
Enable 2-digit additional code
Scan the following barcode to enable the 2-digit additional code.
Enable 5-digit additional code
Scan the following barcode to enable the 5-digit add-on code.
00553
Scan the following barcode, 00553.
Enable 2-digit and 5-digit add-on codes
00550
Scan the following barcode, 00550.
Turn off add-on code*
Force the additional code to be enabled
Scan the following barcode to force the additional code to be turned on.
**UPC-A to EAN-13**
Users can set whether they need to convert UPC-A to EAN-13 output according to their needs. The default is not to convert.
00391
Scan the following barcode, 00391.
Enable UPC-A to EAN13
00390
Scan the following barcode, 00390.
Close UPC-A to EAN13*
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.