This article introduces the setting method of "Instance Analysis", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
C740, E740, F1900, F20, K6, L3, L6BL, L3S, L6BLS, L6S, NT-2100, R3L, S3, S6, H3, M20, NT-1228BC, W6, W6-X, Z3S
Questions
- How to set up instance analysis?
- Where is the instance analysis configuration barcode?
- How to adjust the instance analysis parameters?
Resolution / Answer
This article introduces the purpose and configuration method of "Instance Analysis". Usually refer to this article when you need to change the default behavior of the device, adapt to the business system, or find the corresponding configuration barcode.
**Turn off decoding**
CMD=0x01, DA0=0x01, DA1=0x00, DA2~DA11=0x00,
a=(0)*16+(2+1+1+3)*1=7=0x07
SUM=256-(0x07&FF)=256-(111&11111111)=256-7=249=0xF9
STX CMD DA0 DA1 DA2 DA3 DA4~DA10 DA11 ETX SUM
02H 01H 01H 00H 00H 00H 00H~00H 00H 03H F9H
Hexadecimal command: 02 01 01 00 00 00 00 00 00 00 00 00 00 00 03 F9
**Open decoding timeout 3 seconds**
CMD=0x01, DA0=0x01, DA1=0x02, DA2=B8, DA3=0B, DA4~DA11=0x00,
Timeout 3S=3000MS=0x0BB8
a=(B)*16+(2+1+1+2+8+B+3)*1=204=0xCC
SUM=256-(0xCC&FF)=256-(11001100&11111111)=256-204=52=0x34
STX CMD DA0 DA1 DA2 DA3 DA4~DA10 DA11 ETX SUM
02H 01H 01H 02H B8H 0BH 00~00H 00H 03H 34H
Hexadecimal command: 02 01 01 02 B8 0B 00 00 00 00 00 00 00 00 03 34
**Set baud rate to 115200**
Set command code: 000709
CMD=0x02, DA0=0x07, DA1=0x82,
DA2~DA7=000709=0x30,0x30,0x30,0x30,0x37,0x30,0x39
a=(8+3+3+3+3+3+3)*16+(2+2+7+2+9+5+3)*1=448=0x1c0
SUM=256-(0x1c0&FF)=256-(111000000&11111111)=256-192=64=0x40
STX CMD DA0 DA1 DA2 DA3 DA4 DA5 DA6 DA7 DA8~DA11 ETX SUM
02H 02H 07H 82H 30H 30H 30H 37H 39H 35H 00H~00H 03H 40H
Hexadecimal command: 02 02 07 82 30 30 30 37 30 39 00 00 00 00 03 40
**Add Carriage Return + Line Feed**
Set command encoding: 0213@\r\n
CMD=0x02, DA0=0x08, DA1=0x82,
DA2~DA8=0213@\r\n =0x30,0x32,0x31,0x33,0x40,0x0D,0x0A
a=(8+3+3+3+3+4)*16+(2+2+8+2+2+1+3+13+10+3)*1=430=0x1ae=256-(0x1ae&0xFF)=256-(110101110&11111111)=256-(10101110)=256-174=82=0x52
STX CMD DA0 DA1 DA2 DA3 DA4 DA5 DA6 DA7 DA8 DA9~DA11 ETX SUM
02H 02H 08H 82H 30H 32H 31H 33H 40H 0DH 0AH 00H~00H 03H 52H
Hexadecimal command: 02 02 08 82 30 32 31 33 40 0D 0A 00 00 00 03 52
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.