This article introduces the setting method of "RS232 Baud Rate", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
CS9000, RD1900, NT-1988, NT-12895
Questions
- How to set the RS232 baud rate?
- Where is the RS232 baud rate configuration barcode?
- How to adjust the RS232 baud rate parameters?
Resolution / Answer
This setting is used to configure the communication method or communication parameters between the device and the host. Usually when connecting to a computer, serial device, RS485/Modbus network or access control Wiegand system, you need to ensure that the parameters at both ends are consistent.
The baud rate sends data from the barcode scanner to the terminal at a specified rate. The terminal must be set to the same baud rate as the barcode scanner for normal communication. Default=115200.
(8310030.) 300
Scan the following barcode, (8310030.) 300.
(8310031.) 600
Scan the following barcode to configure (8310031.) 600.
(8310032.) 1200
Scan the following barcode, (8310032.) 1200.
(8310033.) 2400
Scan the following barcode, (8310033.) 2400.
(8310034.) 4800
Scan the following barcode, (8310034.) 4800.
(8310035.) 9600
Scan the following barcode, (8310035.) 9600.
(8310036.) 19200
Scan the following barcode, (8310036.) 19200.
(8310037.) 38400
Scan the following barcode, (8310037.) 38400.
(8310038.) 57,600
Scan the following barcode, (8310038.) 57,600.
(8310039.) *115,200
Scan the following barcode, (8310039.) *115,200.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.