This article introduces the setting method of "Power-on Tone", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
CS9000, RD1900, NT-1988, NT-12895
Questions
- How to set the power-on prompt tone?
- Where is the power-on beep configuration barcode?
- How to adjust the power-on prompt tone parameters?
Resolution / Answer
This setting controls the device's sound, lighting, aiming, or image-related feedback. It is usually used when you need to reduce the beep sound, confirm the scanning status, improve lighting positioning, or adjust the image reading effect.
After the power is successfully turned on, the buzzer will sound to indicate that it has entered the working state. Default = there will be a sound when power on successfully.
(8410130.) No beep after successful power on
Scan the following barcode to configure (8410130.) There will be no beep after successful power-on.
(8410131.) * There will be a sound when the power is successfully turned on.
Scan the following barcode to configure (8410131.) * There will be a prompt tone after successful power-on.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.