This article is used to troubleshoot issues related to "barcode delayed transmission" and gives the corresponding processing directions and settings.
Applicable to:
CS9000, RD1900, NT-1988, NT-12895
Questions
- What to do if barcode transmission is delayed?
- What is the reason for delayed barcode transmission?
- How to deal with delayed barcode transmission?
- What settings need to be checked for delayed barcode transmission?
Resolution / Answer
This article is used to explain the meaning and common processing directions of phenomena such as "barcode delayed transmission". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.
Delays can be set up to 5000ms (5ms increments) per barcode transmission.
**Operating steps:**
- Scan "Barcode Delay"
- Scan the "Appendix Chart" for the 5ms delay number (for example, scan "2", "0" for 100ms)
- Scan "Save"
Eliminating Delay sets the delay number to 0.
(851004.) Barcode delay
Scan the following barcode, (851004.) Barcode Delay.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.