This article is used to troubleshoot "USB COM" related issues and gives the corresponding processing directions and setting entrances.
Applicable to:
CS9000, RD1900, NT-1988, NT-12895
Questions
- What to do with USB COM?
- What is the reason for USB COM?
- How to deal with USB COM?
- What settings need to be checked for USB COM?
Resolution / Answer
This article is used to explain the meaning and common processing directions of phenomena such as "USB COM". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.
Scan the following barcode to configure the barcode scanner into USB COM mode, which emulates a regular RS232-based COM port. If it is a Windows host, you need to install the driver; the Mac system will recognize the device as a USB CDC class device. No additional configuration (such as baud rate, etc.) is required.
(881001133.) USB COM
Scan the following barcode, (881001133.) USB COM.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.