This article introduces the setting method of "keyboard operation", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
CS9000, RD1900, NT-1988, NT-12895
Questions
- How to set up keyboard operation?
- Where is the keyboard operation configuration barcode?
- How to adjust keyboard operating parameters?
Resolution / Answer
This article introduces the use and configuration method of "Keyboard Operation". Usually refer to this article when you need to change the default behavior of the device, adapt to the business system, or find the corresponding configuration barcode.
Configure to perform keyboard operations (such as auto-save) while decoding output.
**Operating steps:**
- Determine the 2-digit hexadecimal value corresponding to the keyboard operation from the "Keyboard Operation ASCII Conversion" table, and determine the 2-digit hexadecimal value of the symbology to be set.
- Scan "Start adding keyboard actions"
- For keyboard operation, swipe "Add Prefix" at the front and "Add Suffix" at the back.
- Scan the corresponding 4-digit hexadecimal value in the "Appendix Chart" (including symbology and keyboard operation)
- Scan "Save"
- Scan "End adding keyboard operation"
**Example: Add decoding output for all symbologys and save (Ctrl+S):**
Scan "Add Keyboard Action" ? "Add Suffix" ? "9", "9", "1", "3" ? "Save". Among them, 9 and 9 correspond to all symbologys, and 1 and 3 correspond to decoding and saving.
(8210042) Start adding keyboard operations
Scan the following barcode (8210042) to start adding keyboard actions.
(8210040) End adding keyboard operation
Scan the following barcode (8210040) to end the keyboard addition operation.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.