This article introduces the setting method of "Light Source", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
RD-2023, RD-2024, GY-70U, GY-80U
Questions
- How to set up the light source?
- Where is the light source configuration barcode?
- How to adjust the light source parameters?
Resolution / Answer
This article introduces the use and configuration method of "light source". Usually refer to this article when you need to change the default behavior of the device, adapt to the business system, or find the corresponding configuration barcode.
Module light source is on (default)
Scan the following barcode to the module light source will be turned on (default).
Module light source is turned off
Scan the following barcode to turn off the module light source.
External light source 1 open
Scan the following barcode to turn on the external light source 1.
External light source 1 off
Scan the following barcode to turn off the external light source 1.
External light source 2 open
Scan the following barcode to turn on the external light source 2.
External light source 2 off
Scan the following barcode to turn off the external light source 2.
Light source switching time 500ms
Scan the following barcode. The light source switching time is 500ms.
Light source switching time 1000ms (default)
Scan the following barcode. The light source switching time is 1000ms (default).
Light source switching time 1500ms
Scan the following barcode. The light source switching time is 1500ms.
Light source switching time 2000ms
Scan the following barcode. The light source switching time is 2000ms.
Note: Only the high-performance version can support external light source control.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.