This article is used to troubleshoot problems related to "barcode end delimiter" and gives the corresponding processing direction and setting entry.
Applicable to:
RD-2023, RD-2024, GY-70U, GY-80U
Questions
- What to do with the delimiter at the end of the barcode?
- What is the reason for the delimiter at the end of the barcode?
- How to deal with the delimiter at the end of the barcode?
- What settings need to be checked for the delimiter at the end of the barcode?
Resolution / Answer
This article is used to explain the meaning and common processing directions of the phenomenon of "barcode end delimiter". Usually when the scan results are abnormal, the device behavior is not as expected, or you need to check whether the current parameters are set incorrectly, you can refer to this article to check them one by one.
Empty
Scan the following barcode to configure it is empty.
Carriage Return + Line Feed
Scan the following barcode to press Enter and line feed.
Enter
Scan the following barcode to press Enter.
Line break
Scan the following barcode to wrap the line.
/
Scan the following barcode, /.
\\
Scan the following barcode,\\.
\-
Scan the following barcode,\-.
\_
Scan the following barcode, \_.
TAB
Scan the following barcode, TAB.
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.