This article introduces the setting method of "successful decoding sound frequency", which is suitable for finding the corresponding configuration barcode and completing parameter adjustment.
Applicable to:
E900
Questions
- How to set the decoding success sound frequency?
- Where is the sound frequency configuration barcode for successful decoding?
- How to adjust the frequency parameters of the sound after successful decoding?
Resolution / Answer
This article introduces the use and configuration method of "Decoding Successful Sound Frequency". Usually refer to this article when you need to change the default behavior of the device, adapt to the business system, or find the corresponding configuration barcode.
[Minimum (800Hz)]
Scan the following barcode to configure [Minimum (800Hz)].
[Low(1600Hz)]
Scan the following barcode to configure [Low (1600Hz)].
**[Medium(2730Hz)]
Scan the following barcode to configure **[Medium (2730Hz)].
[High(4200Hz)]
Scan the following barcode to configure [High (4200Hz)].
[Decoding successful sound frequency custom setting (range: 20-20000Hz)]
Scan the following barcode to configure [Decoding successful sound frequency custom setting (range: 20-20000Hz)].
Set the decoding success sound frequency to 2000Hz. You can set it by reading the following barcodes in sequence:
- Read "Startup Settings"
- Read "Decoding Successful Sound Frequency Custom Settings"
- Data code "2", "0", "0", "0" (see Appendix - Data Code)
- Read "Save" (see Appendix - Save or Cancel)
- Read "Exit Settings"
If this does not resolve the issue, please reset the barcode scanner or contact us. Click here to find your barcode scanner model and perform the reset.